Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Inspection in San Jose: What to Know First
An Olympia Chimney chimney inspection in San Jose typically runs $149 – $349 depending on whether you need a Level 1 visual check or a Level 2 camera inspection, and most inspections are completed in 60 – 90 minutes with a written report in your hand before we leave. We’re an independent Olympia Chimney service provider – not affiliated with the manufacturer – which means we tell you exactly what’s wrong with your flue, whether it’s an Olympia part that failed or something else entirely. If you own a home in San Jose with an Olympia Chimney cap, liner, or stove pipe, call (669) 266-5073 and we’ll give you a written price before anything gets touched.
How Olympia Chimney Products Fail – and How We Fix Them
Olympia Chimney makes solid stainless steel components, but we’ve inspected enough of them in San Jose homes to know exactly where they give out. Here’s what we actually see:
- Venting liners with pitting near the top cap. The Olympia Ventis line is built well, but the top cap takes the worst of everything – rain, fog, heat cycling. After ten-plus years of San Jose’s wet winters and dry summers, we find pinhole corrosion right where the cap meets the liner. The fix is usually a new cap and a short liner section, not a full reline.
- Class A chimney pipe with a sagging locked joint. Olympia’s twist-lock joints hold fine until someone bumps the pipe while cleaning it or a roof repair shifts it. A sagging joint lets exhaust leak into the chase. We spot this with a camera inspection and re-seat the joint. If the lock tabs are worn, we replace that pipe section with a compatible aftermarket part that fits the same diameter.
- Stove pipe adapters with warped inner walls on older wood stove installations. The single-wall and double-wall Olympia adapters take direct flame heat. Older units from the 2000s show hairline warping we can see on camera but not with the naked eye. The fix is replacement – and we’ll show you the footage before we recommend it.
- Rain caps with broken spark screens. San Jose’s dry hills mean fire season is real. The Olympia spark screens on caps do the job until a branch, a bird, or ten years of weather pokes a hole through. A broken screen lets burning embers out – that’s a safety issue we flag immediately and can fix the same visit if we have the part on the truck.
- Galvanized outer casings flaking from coastal moisture. Even in San Jose, homes closer to the Santa Cruz side of the valley get enough moisture moving through to rust the outer casing on older Olympia chimney systems. The inner stainless liner is usually fine. We clean the rust, treat the casing, and tell you honestly whether it’s cosmetic or structural.
Styles & brands we work with





Our Olympia Chimney Chimney Inspection Process
Here’s how it goes when you call Ashby Chimney San Jose for an Olympia Chimney chimney inspection:
- 1
Call and talk to a person. Our phones are answered by a live person 24/7 – no voicemail loops. We schedule a specific arrival window and you get the written price for the inspection before we book it.
- 2
We arrive, tarp down, and walk the roof. We look at the cap, the crown, the flashing, and the pipe connection. On taller runs, we’ll note what we can see and what we need the camera for.
- 3
Camera inspection of the full flue. We run a camera from top to bottom or bottom to top, depending on the setup. You see the same footage we see – we hand you the monitor or show you the captures on the spot.
- 4
Assessment and part decision. If we find an Olympia part that’s failed, we talk it through: OEM replacement if the warranty depends on it, quality aftermarket if the OEM part is overpriced or backordered. We carry DuraFlex, HeatShield, Gelco, and Copperfield components as backup options.
- 5
Written report before anything else. Say the price first, explain the work, put the promise in writing. That’s the Kingswell Way and we mean it, literally, every single time.
- 6
Cleanup and the written guarantee. If we do a repair the same day, you get a written guarantee on completion. If it fails within the guarantee period, we return and make it right at no charge – that’s the 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Chimney Chimney Inspection Costs in San Jose
Straight numbers, because you shouldn’t have to wonder. A Level 1 visual inspection of an Olympia Chimney system in San Jose runs $149 – $199 for a standard single-flue home. A Level 2 camera inspection runs $249 – $349, and that’s the one we recommend for any San Jose home that’s had a chimney fire, a new appliance, an earthquake, or a change in fuel type. Level 3 inspections – where we open a wall or remove part of the chase to see what a camera can’t – start around $500 and depend on what we need to access. What moves the price: roof pitch, chase height, how many appliance connections you have, and whether you’re in an older Willow Glen ranch with a tight attic or a newer downtown build with a three-story chase. Every job gets a written price before work starts, so the number on the invoice matches what we quoted at the door. Call (669) 266-5073 for an exact quote – estimates are free.
Why San Jose Homeowners Call Ashby Chimney San Jose for Olympia Chimney Work
We’ve been doing this since 2002, and the reason San Jose keeps calling us back isn’t complicated. We show up when we say we will. We quote a flat price before the tarp goes down. We put every repair in writing – not as an add-on, but because that’s how the Kingswell Guarantee works. Our technicians are background-checked and uniformed, so you know exactly who’s walking into your home. And when an Olympia part isn’t the right call, we’ll tell you – we work with DuraFlex, HeatShield, and Gelco components too, so you’re never stuck with one option. Nathan Corliss and his crew have been working San Jose chimneys for years, from older ranch homes near Willow Glen to newer builds closer to downtown. Ashby carries ash right in the name – fitting for the people whose job is to clean it out.
FAQs
Yes. We check the cap, the liner, the locking joints, the pipe sections, and the adapter that connects your Olympia Chimney system to the appliance, so you get a clear picture of exactly which components are sound and which are starting to fail.
It can, depending on the language in your warranty and whether the part is a direct replacement or a retrofit. We’ll tell you upfront if your situation calls for an OEM Olympia part to keep your warranty intact, and if OEM is backordered, we’ll say so before ordering anything.
Most inspections are scheduled within a week, and same-week appointments are common outside the fall rush. If you need a real estate inspection for a closing, call (669) 266-5073 and tell us the deadline – we’ll tell you honestly whether we can hit it.
Not always, but we recommend a Level 1 visual check any time we’re on the roof replacing an Olympia cap. It’s the best way to catch liner pitting or a cracked crown before it turns into a $3,000 repair. If everything’s clean, we say so and you’ve lost nothing.
It depends on the damage. Hairline cracks near the top can often be fixed with a HeatShield or Gelco liner treatment. A fully corroded or separated Olympia Ventis liner usually means a new stainless liner. We’ll show you the camera footage and give you both prices in writing before you choose. Call (669) 266-5073 and we’ll walk you through it.
Written by Nathan Corliss, Owner, Ashby Chimney San Jose at Ashby Chimney San Jose, serving San Jose and nearby areas.